It has been specifically designed with the 3D pilot in mind to give rapid response yet still retain the feel needed for precision and hovering stability.

Rotor Head Features:
Maximum 30 deg pitch stroke possible for 3D setup
Wide range of setup setttings from beginner to 3D
Feathering Spindle now same size as 90 size SSZ-4 head.
2pc Plastic Yoke is the same size as SSZ-4 yoke.
SSZ-4 Yoke can be used as an option.
New blade holder with 8mm thrust bearing.
The Aluminium centre hub is the same size as the SSZ-4
SSZ-4 centre hub can be used as an option item.
SSZ-4 seesaw, mixing arm and slide block can be used as option items.
New 120/135 degree swashplate with increased internal bearing diameter from 20 to 25mm. Permits approximately 60% more movement but without control interaction. New Turbulence style tail housing and blade holders plus new tail blades for better tail power and control. Modified main frames to accept 120 and 135 deg SWM system, undercarriage support ribs for greater strength and additional tank mounts (optional tank) New lower height undercarriage skids New SWM linkage parts for both 120 and 135 deg systems. Servo layouts/ mounts also changed making this much more than a simple Sceadu upgrade. Now similar to the Eagle 3 and Turbulence Rudder servo can now front mounted. New, attractive Decal set The new Sceadu SDX SWM is set to become the most sought after 3D machine on the market today. Forget 'bling' it's the performance that counts!!! Note: Supplied without main blades and muffler.

It has been specifically designed with the 3D pilot in mind to give rapid response yet still retain the feel needed for precision and hovering stability.

Rotor Head Features:Maximum 30 deg pitch stroke possible for 3D setupWide range of setup setttings from beginner to 3DFeathering Spindle now same size as 90 size SSZ-4 head.2pc Plastic Yoke is the same size as SSZ-4 yoke.SSZ-4 Yoke can be used as an option.New blade holder with 8mm thrust bearing.The Aluminium centre hub is the same size as the SSZ-4SSZ-4 centre hub can be used as an option item.SSZ-4 seesaw, mixing arm and slide block can be used as option items.

New 120/135 degree swashplate with increased internal bearing diameter from 20 to 25mm. Permits approximately 60% more movement but without control interaction.

New Turbulence style tail housing and blade holders plus new tail blades for better tail power and control.

Modified main frames to accept 120 and 135 deg SWM system, undercarriage support ribs for greater strength and additional tank mounts (optional tank)

New lower height undercarriage skids

New SWM linkage parts for both 120 and 135 deg systems. Servo layouts/ mounts also changed making this much more than a simple Sceadu upgrade. Now similar to the Eagle 3 and Turbulence

Rudder servo can now front mounted.

New, attractive Decal set

The new Sceadu SDX SWM is set to become the most sought after 3D machine on the market today. Forget 'bling' it's the performance that counts!!!

Note: Supplied without main blades and muffler.

• +-15° collective pitch is possible for extreme 3D performance.
• Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
• Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
• Pitch and All servos moved forward for CG.
• Battery tray designed for easy and clean radio gear installation.
• Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
• Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
• Heavy duty tail with thrust bearings.
• 95mm Tail Blades.
• Highly efficient shaft driven tail design.
• Rigid frame design that can also handle hard crashes without damage.
• Carbon Fiber frames, fins and boom supports.
• Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
• Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
• Ready to fly weight (no fuel) is an incredible 3.10Kg.
• Fuel Tank designed so that no additional header tank is required.
• New main gear with one-way bearing design for high torque.
• New tail boom supports.

Please Note:
Additional items may be required to complete this model. If you require further information please contact us for assistance.

The superbly engineered, precision made all-metal rotor and control system yield silky handling links you to the machine as one entity. Ultra high performance, smooth, fast and agile, the G4 is capable of winning F3C contests or 3D competition. The Raptor G4 will make your flying dream come true.

• Easy & fast conversion between flybared or flybarless rotor system
• Hardened 15mm steel main shaft
• Adjustable Bell-Hiller mixing ratio can be set for F3C or 3D (Raptor 90G4 & Raptor E720)
• Aerodynamic carbon paddle (Raptor 90G4 & Raptor E720)
• Collective pitch range +/-15 degrees (Raptor 90G4 & Raptor E720)
• High-quality, color shifting preprinted FRP canopy
• Lightweight and rugged landing skid for low center of gravity
• Rigid 2mm carbon main frame
• Lightweight, high- quality screws hardware
• All metal servo horns & control arms assembly eliminate the need for upgrades
• Lightweight and vented,high-duty 17mm helical main gear
• Innovative Quick-calibration system
• A easy conversion between nitro and electric powering
• Heavy-duty helical bevel tail gears
• Lightweight, one-piece machined metal tail case
• All metal, high–precision & heavy-duty tail rotor system
• Efficient torque tube drive system for crisp rudder response and 100% power transfer
• Easy-install rudder rod guide
• Lightweight one-piece metal tail boom bracket
• 3D carbon vertical fin and carbon tail boom support