UK Online Model Retailer! email:
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Chris Foss ARTF
Filter by Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Ripmax Bullet ARTF
to see more images.
The legendary 70s Bullet returns and is set to create quite a stir amongst an entirely new generation of model pilots! The original Bullet was regarded by many as the definitive sports model of its time and this new improved version will undoubtedly acheive the same iconic status. The Ripmax Bullet enjoys a 10% size increase over the original to cater for todays modern high output engines.
This also provides for a lighter wing loading and improved in-flight handling characteristics. And....whats more, this time it comes factory built and lovingly hand finished!
High quality ARTF construction
Minimal assembly time
Outstanding flight performance
40 - 55
Part No: A-ARTF6714
Item Name: Ripmax Bullet ARTF
Jive Funfly ARTF
to see more images.
The J!VE has been developed for top level competition flying, but is equally well suited for the rough and tumble of normal club use due to its tough yet exceptionally lightweight construction. Designed with the ability to fly extremely slowly yet with outstanding manoeuvrability, the J!VE can take off and land on the smallest of patches.
On low rates the J!VE makes a great second model, but increase them and it becomes a fantastic 3D/Fun Fly model. The large surfaces combined with light wing loading and forgiving handling mean you can try those manoeuvres you have only previously dared attempt on the simulator!
Every part of the design has been thought out with simple design ideas like a braced wire undercarriage to help absorb those less than perfect landings/touch & gos, to the use of a double layer of balsa sheeting in the centre of the wing so the wing bands don't cause any damage.
The wing has been carefully designed to keep it both lightweight and tough. The aerofoil is thinner and has a different section to most traditional funfly models, allowing it to penetrate into the wind better on breezy days and increases the glide ratio. As with many modern 3D aircraft, the J!VE comes fitted with Side Force Generators (Tip plates) which act to increase the side area enough to allow the J!VE in knife edge, a first in its class! They also have another benefit, when the J!VE is turning tightly they reduce the tip stall and help the aircraft track better at slow speeds. This is particularly useful during limbo or touch and go competitions.
• Pre-Built Balsa & Ply Structure
• Pre-Covered in High Quality Film
• Braced Wire Undercarriage
• Reinforced Wing Centre Section
• Large Control Surfaces
• Efficient Aerofoil Wing Section
Give the J!VE a go you won't be disappointed!
IC Engine: Irvine .36 (APC 10x5) or Irvine .39 (APC 11x4)
Radio: 4+ Channel
Servos: 4x New Power XLD-37HB (Flight Controls) & 1x New Power XL-16HM (Throttle)
RX Battery: 4.8v 1000mAh Ni-MH Square
.32 - .39 (Rec.)
4 - 5 Channel (Rec.)
4 Standard, 1 Mini (Rec.)
1660g (3.65 lb)
Part No: A-ARTF6716
Item Name: Jive Funfly ARTF
Ripmax Acro Wot XL ARTF
to see more images.
The Acro Wot has been an amazingly popular model for many years now and the only improvement we could make was to make it larger well here it is, combining the superb aerobatic abilities of the original model with the increased docility brought with the larger wing area and weight, this being particularly noticeable in the windy weather we seem to get so regularly.
Primarily developed for petrol engines of 25 - 35cc, the Acro Wot XL can also be powered by suitable larger glow engines if preferred.
The light yet strong built-up structure is assembled from CNC cut balsa and ply components, the airframe then being covered in heat shrink film in this attractive colour scheme, the tough fibreglass cowling being carefully painted to match. The very complete kit includes all dedicated hardware, including control accessories, fuel tank, alloy undercarriage with wheels and even a high quality aluminium spinner!
To enable easy transport and storage the Acro Wot XL wing separates into two halves which allows it to fit into most hatchbacks, of course transport is even simpler in an estate car.
Fully Built Up Structure from Balsa and Ply
Covered in High Quality Heatshrink Film
Pre-Painted Lightweight Fibreglass Cowling
Detailed Colour Manual
New Bright Colour Scheme
25 - 35cc 2-Stroke (Req.)
4 - 6 Channel (Req.)
5 - 6 Servos (Req.)
5900g (13 lbs)
Part No: A-CF008
Item Name: Acro Wot XL ARTF
Showing 1 - 3 of 4 Results
items per page.
Terms & Conditions
© HobbyStores 2018. All Rights Reserved.