UK Online Model Retailer! email:
Item Name Asc
Item Name Desc
Price - High to Low
Price - Low to High
Filter by Price
Up to £4.99
£5.00 - £9.99
£10.00 - £19.99
£20.00 - £49.99
£50.00 - £99.99
£100.00 - £199.99
£200.00 - £499.99
£500.00 and Over
Hirobo Srb Quark 35Mhz Mode 2
to see more images.
Just now and then, something comes along that redefines the class and leaves everything else in its wake. The new Hirobo SRB Quark is that machine. This all new fixed-pitch machine is far from basic and incorporates many top of the range components and patented ideas that all combine to make the easiest indoor machine to fly, yet retain that 'real model' feel.
The SRB Quark is designed for indoor flying or outside on calm days.The fully integrated receiver (35mhz), twin speed controllers and gyro are mated together in one 'unit' and have been developed purely for the SRB Quark. The system incorporates an arming facility to ensure you are really ready to fly before opening the throttle. The single main rotor is driven by an efficient 13.5g, 1720kv, outrunner brushless motor through a carbon main shaft for strength and light weight. Main rotors are foam like the XRB to act as a damper and absorb energy in a crash , preventing personal injury to the pilot or spectators. Like the famous XRB, the entire new 'aerodynamic' stabiliser assembly comes off after impact to minimise damage. The shaft drive tail is powered by a high quality, 10g coreless motor to a regular tail gearbox and then through Hirobo's patented tail rotor control system with 'safe' foam blades. Cyclic control is by two independent and conventional, 6g servos.The hard-cased, 480mAh 2 cell Li-Po (30g) is charged via the dedicated balance type, mains charger supplied and will give about 10 minutes of flight time. Flight performance is stunning and intended to move the pilot on to a new level from an XRB with a stable and forgiving machine that responds like a conventional model to commands.
A great deal of time has been spent on minimising weight to gain performance and long flight times. Just sometimes, it is nice to fly and own the best rather than the cheapest!
Contents; Ready to fly Helicopter, 480mAh 2 cell li-po battery, mains charger with balancing, 35MHz Mode 2 transmitter, spare main blades, rotor balancer.
Part No: A-H0302-907
Item Name: Hirobo Srb Quark 35Mhz Mode 2
Hirobo Lepton Ex Kit
to see more images.
With the performance of a 50 class IC helicopter, Hirobo's new electric powered Lepton EX is capable of advanced 3D and F3C flight. Supplied in kit form, the Lepton EX features the highest quality components such as an all-metal SZ-M rotor head, swashplate, washout assembly and mixing levers. The metal cased, belt-driven tail rotor gearbox is fully ballraced, as are all the bellcranks used in the push-pull SWM control system.
Offering incredible stiffness and strength with very low weight, the main frames are a magnesium and carbon hybrid that offers superb resistance to vibration and disperses heat well.
An aluminium centre hub/auto unit with a machine cut 94T acetal main gear and 24/26T pinions finish off the drive system.
If you're looking for a practical alternative to IC power with no loss of performance and the highest quality throughout... it has to be the Lepton EX.
• 3 servo CCPM, push-pull SWM control system with ballraced bellcranks
• DTDS belt driven tail
• 425mm symmetrical FRP main blades
• Black aluminium boom and boom braces
• Metal cased tail rotor gearbox
• All-metal SZ-M rotor head
• Aluminium swashplate, washout assembly and mxing levers
• Magnesium and carbon hybrid main frames
• Lightweight blow moulded polythene canopy
• 94T machine-cut acetal main gear with aluminium centre hub and auto unit
Further items recommended to complete the Lepton EX:
M-MM282610 - AXI2826/10 Brushless Motor
P-JESPIN44 - Jeti Spin 44 Brushless Speed Controller
O-IM4S1P320020C - Impulse 4 Cell 3200 Li-Po Battery
P-S3150 - Futaba S3150 Servos (3 required)
P-S9650 - Futaba S9650 Tail Servo
P-GY401- Futaba GY401 Gyro
Part No: A-H0304-903
Item Name: Hirobo Lepton Ex Kit
Hirobo Embla 450E Slm Kit W/Esc+Mot
to see more images.
Embla is perfect as a first outdoor model after flying with indoor models... but in the hands of an experienced pilot, it is a machine capable of handling the most aggressive 3D flying you ever imagined possible with a 450 size model. Supplied with the all-metal SLM flybarless head, powerful 29/10T/3700 brushless motor and 40A brushless ESC, it requires your choice of 3S 2500mAh Li-Po, suitable radio and 3-axis gyro.
The flybarless SLM rotor head design means there is less power loss and a maximum pitch range of +/-16° (total of 32 degrees) is available.
• Carbon Frame • Metal Rotor Head • Painted Canopy • 325mm Symmetrical Carbon Blades • Metal Tail Unit Case • Motor/ESC
11.1V 3S1P 2100-2500mAh (Req.)
6 Channel (Req.)
Tail Rotor Diameter:
Part No: A-H0304-905
Item Name: Embla 450E Slm Kit W/Esc+Motor Y
Showing 1 - 3 of 3 Results
items per page.
Terms & Conditions
© HobbyStores 2018. All Rights Reserved.